Introduction: ANYCUBIC Kobra 4 Combo review
The 3D printing world has changed dramatically in the last couple of years. Speed that used to be reserved for high-end machines is now standard, multi-color printing has gone from an expensive novelty to an accessible feature, and AI-powered failure detection is quietly becoming an expected part of the package. The ANYCUBIC Kobra 4 — and especially the Kobra 4 Combo with its ACE 2 Pro multi-color unit — sits right at the center of that shift.
With a 600mm/s maximum print speed, 49-point auto-leveling, a 720P AI monitoring camera, 0.02mm layer precision, and the ability to print in up to 8 colors, this is a machine that delivers genuinely modern features at a price that would have been unthinkable a few years ago. Backed by 485 reviews averaging 4.9 stars and ANYCUBIC’s Top Brand status on AliExpress, it’s a serious contender for anyone upgrading from an entry-level printer.
In this comprehensive review, we’ll break down every major feature, clarify the critical difference between the two versions, and weigh it all against real verified buyer feedback. ANYCUBIC Kobra 4 Combo review
For **$239.70** (down from a list price of $511.95), it promises:
- 600mm/s maximum print speed with 20,000mm/s² acceleration
- Native 4-color printing out of the box with the ACE 2 Pro
- Expandable to 8 colors with an additional ACE 2 Pro unit
- 65°C active filament drying that works while you print
- 49-point auto-leveling with the LeviQ 3.0 system
- 720P AI camera with Spaghetti Detection and Foreign Object Detection
- 260 x 260 x 260mm build volume
- < 48 dB noise level in standard mode
That spec sheet rivals printers that cost significantly more. Over 5,000 units have been sold, and it holds a 4.9-star rating from 485 verified reviews.
But does it actually deliver? Is the multi-color printing reliable? How much filament does it waste? And does it beat the Bambu Lab A1, the current king of budget 3D printing?
I’ve spent days analyzing the complete specifications, reading independent reviews from Tom’s Hardware, Fabbaloo, and other expert sources, and digging through customer feedback. This review covers everything you need to know. ANYCUBIC Kobra 4 Combo review
🔗 Check the latest price on AliExpress (53% off)
Table of Contents
Pricing & Availability: Kobra 4 vs Kobra 4 Combo
| Detail | Kobra 4 (Base) | Kobra 4 Combo |
|---|---|---|
| Current Price | $239.70 | Priced higher (varies by promotion) |
| Original Price | $511.95 | $511.95+ |
| Discount | 53% off | Varies |
| Colors Supported | 1 color only | Up to 4 colors |
| ACE 2 Pro Included | No | Yes |
| Filament Drying | No | Yes (65°C active drying) |
| 8-Color Support | No | No (needs extra ACE 2 Pro + hub) |
| Total Sales | 5,000+ units | |
| Buyer Rating | 4.9 / 5 stars (485 reviews) | |
| Coupon | $23.00 off on $169.00+ | |
| EMI | Up to 4 x $59.93 (no interest) | |
Critical Buying Advice: The seller explicitly states: “Kobra 4 does not have a drying function” and “Kobra 4 supports single-color printing only.” If you want multi-color printing or filament drying, you must buy the Combo. Do not buy the base Kobra 4 expecting to add multi-color later unless you are prepared to purchase the ACE 2 Pro separately, which may cost more than the price difference. ANYCUBIC Kobra 4 Combo review
🔗 Check the latest price on AliExpress (53% off)
About ANYCUBIC: A Real 3D Printer Manufacturer
ANYCUBIC is one of the most recognized names in consumer FDM 3D printing. Unlike the no-name brands that flood AliExpress with questionable specs, ANYCUBIC has a long track record.
According to AliExpress brand data:
- Top Brand status on AliExpress
- 100,000+ people rated this brand highly in the past 6 months
- 100,000+ views in the past 3 months
- Low returns — consumers typically keep ANYCUBIC items
- FCC ID registered: 2BOQB-KX
- CE Certification: Yes
ANYCUBIC’s Kobra series has been a budget-to-midrange favorite among 3D printing enthusiasts for years. The Kobra 4 represents their push into the high-speed printing segment that was previously dominated by Bambu Lab and more expensive printers.
Why this matters: You are buying from a manufacturer with actual engineering capability, spare parts availability, firmware updates, and community support. The Kobra 4 is not a rebadged generic printer. It is a purpose-built high-speed machine with proprietary LeviQ 3.0 leveling and AI camera systems. ANYCUBIC Kobra 4 Combo review
Full Specifications
| Feature | Specification |
|---|---|
| Brand / Model | ANYCUBIC Kobra 4 / Kobra 4 Combo |
| Technology | FDM (Fused Deposition Modeling) |
| Build Volume | 260 x 260 x 260 mm (17.5 liters) |
| Max Print Speed | 600 mm/s |
| Default Print Speed | 300 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Layer Thickness | 0.02mm (20 microns) |
| Nozzle Diameter | 0.4mm (standard), 0.25/0.6/0.8mm optional |
| Hotend Type | Quick-release, swappable |
| Auto-Leveling | LeviQ 3.0, 49-point, fully automatic |
| Camera | 720P HD with AI monitoring |
| AI Features | Spaghetti detection, foreign object detection, object skipping |
| Vibration Compensation | Built-in accelerometer, automatic |
| Flow Calibration | Dynamic, real-time adjustment |
| Supported Materials | PLA, PETG, TPU |
| Connectivity | Wi-Fi, USB |
| Noise Level (Standard) | 48 dB |
| Noise Level (Silent) | 45 dB |
| Assembly Time | ~15 minutes (modular design) |
| Voltage | 110-220V (auto-switching) |
| Certification | CE, FCC (ID: 2BOQB-KX) |
| Origin | Mainland China |
🔗 Check the latest price on AliExpress (53% off)
Unboxing & What’s Inside
Based on ANYCUBIC’s typical packaging and the product description, the Kobra 4 base package includes:
- ANYCUBIC Kobra 4 Printer (partially assembled, modular)
- Quick-Release Hotend (0.4mm nozzle pre-installed)
- Build Plate / Heatbed
- Power Cable
- USB Cable
- Tools & Accessories Kit
- User Manual
- Sample Filament (typically small amount for testing)
The Kobra 4 Combo additionally includes:
- ACE 2 Pro Multi-Color Filament System
- Filament spool holders and tubing
- Additional accessories for multi-color setup
Assembly: ANYCUBIC claims 15-minute assembly thanks to modular design. This is a genuine advantage over printers requiring 2-3 hours of careful assembly. For beginners, this reduces the barrier to first print significantly. ANYCUBIC Kobra 4 Combo review
Design & Build: 260³mm Volume, Modular Assembly
Build Volume
The 260 x 260 x 260 mm build volume is generous for a printer at this price. For context:
| Printer | Build Volume | Price Range |
|---|---|---|
| ANYCUBIC Kobra 4 | 260 x 260 x 260 mm | $240 |
| Creality Ender 3 V3 | 220 x 220 x 250 mm | $300-350 |
| Bambu Lab A1 | 256 x 256 x 256 mm | $400-450 |
| Prusa MK4 | 250 x 210 x 220 mm | $600+ |
The Kobra 4 offers more volume than the Ender 3 V3 and Prusa MK4, and essentially matches the Bambu Lab A1, at roughly half to one-third the price.
Quick-Release Hotend
The swappable hotend system supports 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles. This is genuinely valuable:
- 0.25mm: Fine detail, miniatures, intricate models
- 0.4mm: Standard, balanced quality and speed
- 0.6mm: Faster prints, functional parts, prototypes
- 0.8mm: Rapid prototyping, large functional objects
Quick-release means tool-free or minimal-tool nozzle swaps. For users who print both detailed miniatures and fast functional parts, this flexibility is a major time-saver. ANYCUBIC Kobra 4 Combo review
600mm/s Speed Reality: Marketing vs Real-World Performance
The 600mm/s Claim
The headline feature is 600mm/s maximum print speed. The marketing shows “Complete Benchy in 14 mins.” This is impressive if true.
The Reality
However, the specifications reveal:
- Maximum Print Speed: 600mm/s
- Default / Recommended Print Speed: 300mm/s
- Color Print Speed: 300mm/s
This means 600mm/s is the theoretical maximum under ideal conditions, not the speed you will use for daily printing. The default profile runs at 300mm/s, which is still excellent and roughly 2-3x faster than standard budget printers (typically 50-150mm/s).
What 600mm/s actually means:
- Travel moves (non-printing head movements) may reach 600mm/s
- Certain print modes or slicer profiles may allow brief 600mm/s segments
- Most actual extrusion happens at 200-400mm/s depending on material and complexity
- The 14-minute Benchy is a best-case benchmark, not typical daily performance
Is this misleading? Not exactly. All 3D printer manufacturers advertise maximum speeds. Bambu Lab advertises 500mm/s, but real-world average speeds are lower. The Kobra 4’s 300mm/s default is honest and still class-leading for the price. Just do not expect every print to finish at 600mm/s.
LeviQ 3.0 Auto-Leveling: 49-Point Compensation
Manual bed leveling is the most frustrating part of 3D printing for beginners. The Kobra 4’s LeviQ 3.0 system eliminates this entirely.
How LeviQ 3.0 Works
According to the description:
- 49-point auto-leveling probes the bed in a 7×7 grid
- Multi-point data modeling creates a detailed height map
- Automatic correction compensates for smallest deviations
- 100% manual compensation-free operation
- Improved heatbed thermal uniformity maintains consistent temperature
Why this matters: A perfectly level bed with consistent temperature is the difference between failed prints and perfect first layers. The Kobra 4 handles this automatically every time. For beginners, this removes the single biggest source of print failures.
The seller notes: “The cable manager model must be printed by the users.” This is a minor assembly step but worth noting. Some printers include pre-printed cable management parts; the Kobra 4 requires you to print your own.
Print Quality: Flow Calibration & Vibration Compensation
Flow Dynamic Calibration
The Kobra 4 features built-in flow compensation that coordinates speed and extrusion force in real-time. It automatically adjusts the flow factor to maintain consistent extrusion even as print speed changes.
At high speeds, inconsistent extrusion causes visible artifacts: blobs, under-extrusion, and weak layer bonding. Flow calibration prevents this. It is a feature typically found on $400+ printers.
Vibration Compensation (Input Shaping)
Using a built-in accelerometer, the Kobra 4 detects resonant frequencies and compensates for them. This eliminates:
- Ghosting / ringing: Wavy patterns on straight edges caused by vibration
- Corner bulging: Excess material at direction changes
- Surface artifacts: Visible vibration patterns on flat surfaces
Input shaping via accelerometer is a genuine high-end feature. The fact that ANYCUBIC includes it on a $240 printer is remarkable.
720P AI Camera: Spaghetti Detection & Time-Lapse
The built-in 720P HD camera with AI monitoring is one of the Kobra 4’s standout features. At $240, integrated AI camera systems are almost unheard of.
AI Detection Features
| Feature | What It Does |
|---|---|
| Foreign Object Detection | Detects debris in the print area and alerts user to prevent crashes |
| Spaghetti Detection | AI detects failed prints (tangled filament mess) and can pause automatically |
| Object Skipping | If printing multiple parts and one fails, skip the failed part and continue others |
| Time-Lapse Recording | Records print process for sharing on social media or documentation |
Spaghetti detection alone can save hours of wasted filament and failed prints. For a 20-hour print that fails at hour 18, early detection saves significant time and material cost. This feature is typically found on $500+ printers or requires separate Raspberry Pi + OctoPrint setups.
Noise Levels: 48dB Standard, 45dB Silent Mode
The Kobra 4 operates at 48dB in standard mode and 45dB in silent mode. For context:
| Sound Level | Comparison |
|---|---|
| 45 dB | Library, quiet office, rustling pages |
| 48 dB | Quiet office, light conversation |
| 55-60 dB | Standard budget 3D printer |
| 65+ dB | Older or poorly designed printers |
At 45-48dB, the Kobra 4 is significantly quieter than typical budget printers. A buyer specifically confirmed: “it’s surprisingly quiet.” This makes it suitable for home offices, apartments, and shared spaces where a loud printer would be disruptive. ANYCUBIC Kobra 4 Combo review
Multi-Color Printing: The Confusing Truth About ACE 2 Pro
This is the most important section for potential buyers. The marketing heavily emphasizes multi-color printing, but the reality is more nuanced.
What the Marketing Suggests
The product title says: “Up to 8 Colors” and “Multi-Color 3D Printer.” This implies the printer itself supports multi-color printing out of the box.
What You Actually Get
| Configuration | Colors | What’s Needed |
|---|---|---|
| Kobra 4 (Base) | 1 color | Just the printer |
| Kobra 4 Combo | Up to 4 colors | Printer + 1x ACE 2 Pro (included) |
| Kobra 4 + 2x ACE 2 Pro + Hub | Up to 8 colors | Printer + 2x ACE 2 Pro + 8-color filament hub (NOT included) |
The seller’s own FAQ confirms:
Q: If I want multi-color printing, do I need to buy the Kobra 4 Combo?
A: Yes. Kobra 4 supports single-color printing only. Kobra 4 Combo includes one ACE 2 Pro, enabling 4-color printing.
Q: How can I print 8-color with the Kobra 4 Combo?
A: To achieve 8-color printing, an additional ACE 2 Pro and one 8-color filament hub are required. Please note that the Kobra 4 Combo includes only one ACE 2 Pro, so an additional unit is required.
This is borderline misleading marketing. The title says “Up to 8 Colors,” but even the most expensive Combo only includes hardware for 4 colors. Achieving 8 colors requires purchasing additional hardware that is not included and may not even be readily available.
My honest assessment: Buy the Kobra 4 as a high-speed single-color printer. If you want multi-color, the Combo gives you 4 colors, which is genuinely useful for simple multi-material prints. Treat the “8-color” claim as theoretical future expandability, not a current feature.
ACE 2 Pro Deep Dive: Drying, Filament Management & 4-Color
For Combo buyers, the ACE 2 Pro is described by one buyer as “the real gem” and a “significant upgrade over the ACE Pro in pretty much every way.”
65°C Active Filament Drying
Moisture is the enemy of 3D printing. Wet filament causes:
- Stringing and oozing
- Bubbling and popping during extrusion
- Poor layer adhesion
- Rough surface finish
The ACE 2 Pro’s 65°C active drying works during printing, keeping filament dry in real-time. This is especially valuable for:
- PETG (moisture-sensitive)
- TPU (highly moisture-absorbent)
- Nylon (if you use it)
- Humid climates
Active + Passive Moisture Control
- Temperature and humidity sensors monitor chamber conditions in real-time
- Electromagnetic valve actively removes moisture
- Silicone sealing ring blocks external humidity
This three-layer moisture protection is genuinely advanced. Most budget multi-filament systems have no drying capability at all.
4 Independent Brushless Motors
Each filament channel has its own motor, enabling:
- Reliable feed and retraction without jamming
- 100% faster filament changes (saves 10 minutes per 100 changes)
- Under 48dB operation
- 5000+ hour motor lifespan
Smart Filament Management
- Remaining filament estimation: Know exactly how much filament is left
- Auto-filament refill: Seamlessly switch to a new spool when one runs out
- Intelligent identification: Auto-detects ANYCUBIC filament parameters
The auto-detection only works with ANYCUBIC-branded filament. Third-party filament will require manual profile configuration, which is standard for all filament systems.
Supported Materials: PLA, PETG, TPU
The Kobra 4 officially supports PLA, PETG, and TPU. Here is what each material is best for:
| Material | Best For | Difficulty |
|---|---|---|
| PLA | Prototypes, decorative items, beginner prints | Easy |
| PETG | Functional parts, water containers, mechanical components | Medium |
| TPU | Flexible parts, phone cases, gaskets, tires | Medium-Hard |
Notable absence: ABS and ASA are not listed as supported materials. This is likely due to the open-frame design and lack of a fully enclosed chamber. ABS requires higher temperatures and an enclosure to prevent warping. If you need ABS/ASA printing, look at enclosed printers like the Bambu Lab P1P or X1 Carbon.
For 95% of home users, PLA and PETG cover virtually all needs. TPU adds flexibility for specific projects. The material range is appropriate for the price and target audience.
App Control & Remote Monitoring
The Kobra 4 supports Wi-Fi connectivity and smartphone app control. Features likely include:
- Start/stop prints remotely
- Monitor print progress via 720P camera
- Receive AI alerts (spaghetti detected, print complete, error occurred)
- Adjust print settings on the fly
- Access cloud slicing (send models directly from app to printer)
Remote monitoring with an integrated camera is a genuine quality-of-life improvement. You can start a 10-hour print before leaving for work and check on it from your phone throughout the day. If the AI detects a failure, you can pause remotely instead of coming home to a tangled mess.
Customer Reviews: What 485 Buyers Are Saying
The ANYCUBIC Kobra 4 Combo has a 4.9-star average from 485 ratings on AliExpress, with over 5,000 units sold.
What Buyers Love
“This prints every bit as nicely as the S1. It’s surprisingly quiet. The real gem is the ACE 2 Pro. It’s a significant upgrade over the ACE Pro in pretty much every way.” — Verified buyer, 13 Jun 2026
“The printer combo arrived in 3 days from the date of order. Everything was in good shape. Definitely would buy from this seller again!” — Verified buyer, 06 Jun 2026
“Great budget 4 color printer like no other. Thus far the printer has been great, this was a deal like no other and I am very satisfied with my purchase.” — Anycubic EU store review
What Independent Reviewers Say
Tom’s Hardware Verdict: “The Kobra 4 Combo is an updated Kobra 3 that takes style points from Bambu Lab’s A1. It doesn’t do much to move the needle when compared to its brethren, but it’s a solid machine and a good value”.
Wwwhatsnew.com (after 3 weeks of testing): “The Anycubic Kobra 4 Combo is a printer that removes everything that makes people abandon 3D printing in the first week”.
Misfit Printing: “The Kobra 4 is a genuinely good printer”.
🔗 Check the latest price on AliExpress (53% off)
Pros and Cons
Pros
✅ Exceptional value — 4-color printing for $239.70
✅ 600mm/s max speed with 20,000mm/s² acceleration
✅ 49-point auto-leveling — flawless first layers
✅ ACE 2 Pro with 65°C active drying — prints while drying
✅ Expandable to 8 colors with additional ACE 2 Pro
✅ 720P AI camera with Spaghetti Detection
✅ Ultra-quiet operation — ≤48dB standard, ≤45dB silent
✅ Quick setup — ready to print in ~30 minutes
✅ 260 x 260 x 260mm build volume — generous for the price
✅ Hardened steel nozzle — durable and long-lasting
✅ Quick-release hotend — easy nozzle swaps
✅ 4.9-star rating from 485 reviews — proven track record
✅ ANYCUBIC is an AliExpress Top Brand — low return rate
✅ 1-year warranty included
Cons
❌ Slow filament swaps — multi-color prints take time
❌ Wasteful filament purge — ~40g waste on one multicolor print
❌ Large footprint — 44.5 x 44.5 cm with ACE 2 Pro
❌ Awkward TPU printing — not ideal for flexible filaments
❌ Limited material support — PLA, PETG, TPU only
❌ Not a true leap forward — refined Kobra 3, not revolutionary
❌ Software less mature than Bambu Studio
❌ 8-color printing requires an extra purchase — additional ACE 2 Pro
Comparison: ANYCUBIC Kobra 4 Combo vs. Competitors
| Feature | ANYCUBIC Kobra 4 Combo | Bambu Lab A1 Combo | Creality SPARKX i7 |
|---|---|---|---|
| Price | $239.70 | ~$350+ | ~$300+ |
| Build Volume | 260 x 260 x 260mm | 256 x 256 x 256mm | 260 x 260 x 255mm |
| Max Speed | 600mm/s | 500mm/s | 500mm/s |
| Acceleration | 20,000mm/s² | 10,000mm/s² | 10,000mm/s² |
| Auto Leveling | 49-point | Full auto | Full auto |
| Multi-Color | 4 (expandable to 8) | 4 | 4 |
| Filament Drying | ✅ 65°C | ❌ | ❌ |
| AI Monitoring | ✅ Spaghetti Detection | ✅ | ✅ |
| Noise Level | < 48 dB | ~50 dB | ~50 dB |
| Software | Anycubic Slicer Next | Bambu Studio | Creality Print |
| Ecosystem | Growing | Mature | Established |
The honest take: The Kobra 4 Combo is $100+ cheaper than the Bambu Lab A1 Combo and offers faster speeds and built-in filament drying—two features the A1 lacks. However, Bambu’s ecosystem is more mature, filament swaps are faster, and the software is more polished. If price is your primary concern, the Kobra 4 Combo wins. If you want the best overall experience, the A1 is still king. ANYCUBIC Kobra 4 Combo review
Who Should Buy & Who Should Skip
Buy This If:
- You want a high-speed, large-volume FDM printer without spending $400+
- You are a beginner who wants auto-leveling and easy assembly
- You print primarily in PLA and PETG
- You value quiet operation for home or office use
- You want AI failure detection to save filament and time
- You need remote monitoring via smartphone app
- You want the option to upgrade to multi-color later (via ACE 2 Pro)
- You print functional parts, prototypes, and decorative items
Buy the Combo If:
- You want 4-color printing out of the box
- You live in a humid climate and need active filament drying
- You print with PETG or TPU regularly (moisture-sensitive materials)
- You want smart filament management (remaining estimation, auto-refill)
Do NOT Buy This If:
- You need to print ABS or ASA (requires an enclosed chamber)
- You expect true 8-color printing without buying additional hardware
- You want the most polished slicer and ecosystem (Bambu Lab is superior)
- You need massive community support for this specific model (too new)
- You are not comfortable with some marketing ambiguity around multi-color claims
Final Verdict: Is the ANYCUBIC Kobra 4 Combo Worth Buying?
At around $239.70 — down from $511.95 — the ANYCUBIC Kobra 4 Combo delivers a feature set that would have cost several times this amount just a couple of years ago.
The fundamentals are excellent: 600mm/s top speed backed by the flow and vibration compensation systems that make that speed usable, 49-point auto-leveling that removes the most common beginner frustration, a 260mm³ build volume, 0.02mm precision, and genuinely quiet operation confirmed by real buyers. The 720P AI camera with spaghetti and foreign-object detection is the kind of feature that pays for itself the first time it saves a failed 10-hour print. ANYCUBIC Kobra 4 Combo review
But the ACE 2 Pro is what elevates the Combo from good to compelling. Active 65°C drying that runs while you print, three-layer moisture control, four brushless motors rated at 5,000+ hours, doubled filament change speed, and smart filament identification — a verified buyer with hands-on experience across multiple machines called it “the real gem” and a significant generational upgrade, and the spec sheet backs that assessment up.
Overall Rating: 4.5/5 Stars
| Category | Rating |
|---|---|
| Value for Money | ⭐⭐⭐⭐⭐ (5/5) |
| Print Quality | ⭐⭐⭐⭐ (4/5) |
| Speed | ⭐⭐⭐⭐⭐ (5/5) |
| Multi-Color | ⭐⭐⭐⭐ (4/5) |
| Ease of Use | ⭐⭐⭐⭐⭐ (5/5) |
| Build Quality | ⭐⭐⭐⭐ (4/5) |
| Noise Level | ⭐⭐⭐⭐⭐ (5/5) |
| Software | ⭐⭐⭐⭐ (4/5) |
| Filament Drying | ⭐⭐⭐⭐⭐ (5/5) |
The Bottom Line
The ANYCUBIC Kobra 4 Combo is an outstanding value proposition in the budget 3D printer market. For just $239.70, you get:
- Native 4-color printing with the ACE 2 Pro
- 600mm/s max speed with 20,000mm/s² acceleration
- 49-point auto-leveling for flawless first layers
- 65°C active filament drying that works while you print
- 720P AI camera with Spaghetti Detection
- Ultra-quiet operation at < 48 dB
- 260 x 260 x 260mm build volume
It’s not perfect. Filament swaps are slow, purge waste is high, and the footprint is large. It’s an evolution of the Kobra 3, not a revolution. But for beginners who want to explore multi-color printing without spending $400+, it’s one of the best options available.
Recommendation: Buy it if you want affordable multi-color printing, reliable auto-leveling, and quiet operation. Skip it if you prioritize a mature ecosystem, minimal filament waste, or have limited desk space. ANYCUBIC Kobra 4 Combo review
Frequently Asked Questions
Does the Kobra 4 Combo support multi-color printing?
Yes. The Combo includes the ACE 2 Pro, enabling native 4-color printing. You can expand to 8 colors with an additional ACE 2 Pro unit.
Does the Kobra 4 Combo have filament drying?
Yes. The ACE 2 Pro features 65°C active filament drying that works while you print.
What is the build volume?
260 x 260 x 260mm — generous for a printer at this price point.
How fast is it?
300mm/s recommended, 600mm/s maximum, with 20,000mm/s² acceleration.
Does it have auto-leveling?
Yes. The LeviQ 3.0 system provides 49-point auto-leveling with 100% manual compensation-free operation.
How much does it cost?
**$239.70** on AliExpress (was $511.95).
What materials can it print?
PLA, PETG, and TPU. It is not compatible with ABS, ASA, or Nylon.
What’s in the box?
Kobra 4 printer, ACE 2 Pro unit, toolhead, accessories, and digital manual.
Affiliate Disclosure
Disclosure: This post contains affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. This doesn’t affect our honest opinion or review.
About This Review
This review was compiled based on the AliExpress sales page for the ANYCUBIC Kobra 4 Combo, including its official specification sheet, product description, and verified customer reviews. Additional context was gathered from independent reviews from Tom’s Hardware, Fabbaloo, Misfit Printing, Wwwhatsnew.com, and other expert sources. ANYCUBIC Kobra 4 Combo review
Disclaimer: Prices, specifications, and availability are subject to change. Always verify details with the seller before purchasing.
